Thread flange
Thread flange is also called as screwed flange which is widely used for pipe line in wellhead oil and gas industry
A thread flange usually has a female thread inside the body to match up to a pipe thread. The screw flange is a non-welding flange, which always make inner hole of the flange into pipe threads and connected with the pipe with a box female thread.
Threaded pipe flanges are similar to slip-on pipe flanges except the inner bore of threaded pipe flange has tapered threads. Threaded pipe flanges are used with pipes that have external threads. The benefit of these pipe flanges is that it can be attached without welding. Threaded pipe flanges are often used for small diameter, high pressure requirements.
We CCSC technology dedicate to total thread flanges solution for our clients, our thread flanges can meet and exceed the industry’s requirements in severe working condition, low or high temperature and related working pressures. The high strength of forged bodies make our thread flange most reliable and long lasting.
Our thread flanges are made in compliance with international standards such as API spec.6A, ANSI B16.5 and ASME B16.5 etc.
Typically application include wellhead thread flange, oilfield choke manifold system, crude oil and natural gas pipeline, onshore drilling & production lines, offshore drilling & production lines, subsea pipeline application ,oil and gas processing plant etc.
Features
●Connection Type: RTJ Flange,RF Flange,box female thread end(NPT ,LP,EUE,NUE,BTC,IF)
●Material: A105,1020,1045,AISI 4130, AISI 4140,ASTM 304SS,ASTM 316SS, ASTM 410SS, Inconel 718,
Inconel 625,
ANSI UNS Duplex steel :F51(S31803) , F52(S32900), F53(S32750), F60(S32205), F68(S32304)
●Nominal size: 1 inch to 30 inch
●Design Standard: API 6A,ANSI B16.5 ,ASME B16.5,API 17D
Application in oil and gas industry
● Oilfield manifold system, ●Crude oil and natural gas Pipeline
● Onshore drilling & production ●Offshore drilling & production
● Subsea pipeline application ●Oil and gas processing plant
Guidelines for procurement: Client’s inquiry should include belows information before purchasing
1, Flange connection : RF or RTJ ,box thread size
2, Flange standard: API 6A, ANSI/ASME B16.5,API 17D
3,Working pressure: ASME Class 150 to Class 2500 , API 6A 2000PSI to 20000 PSI
4,Nominal size: 1 inch to 30 inch ,1-13/16” to 30”
5,Material requirement :
Carbon steel (A105,AISI1010,AISI1020,AISI 1045)
Alloy steel (AISI 4130,4135,4140)
Stainless steel (ASTM 304SS,316SS,410SS)
Duplex stainless steel (F51/UNS S31803,F52/UNS S32900 ,F53/UNS S32750, F55/UNS S32760,
F60/UNS S32205, F61/UNS S32505)
Inconel alloy: Inconel600,Inconel 601, Inconel 617,Inconel625,Inconel 690,Inconel718,
Inconel X-750）。
6,Quantity
All rights reserved,copyrights@ccscpetro.2019 Contact person: clark@ccscpetro.com
