Offshore platform separator control valve
Offshore platform separator control valve is widely used in an offshore platform for controlling fluid. It is usually installed on the pipeline of a FWKO or other separator pipeline system.
Usually Before oil can be shipped from an offshore platform for sale or for production all the impurities which is in the stream must be removed. Most of the time, these impurities are water, but there is usually a ratio of gas that will also be in the stream. To remove impurities and entrained gases, the mixture stream is normally sent through a series of FWKO separators. The separated oil fluid is sent for export and the gas can be compressed and used for injection or for export.
So in this case, we need some offshore platform separator control valves to control the fluid.
Offshore platform separator control valve is usually located at the position such as from FWKO drum gas outlet to gas export header, from test separator liquid outlet to production header, from condensate coalesce liquid outlet to gas scrubber header, from flare K.O. drum liquid outlet to closed drain drum, from dry compressed air vessel outlet gas to utility air distribution, from sea water cassion outlet to overboard cassion, closed drain booster pump,from meg line to gas condensate header, from gas unlet to fuel scrubber.
CCSC technology offshore platform separator control valve can be designed as customer’s requirements which can meet general service, heavy duty and severe service working conditions.
The actuator of the offshore platform separator control valve can be chosen with hand wheel, Diaphragm actuator, piston actuator and electric actuator etc.